- Scheu Ministar Service Manual
- Scheu Ministar Manual Model
- Ministar Dental
- Scheu Biostar
- Scheu Ministar Instructions
Scheu Ministar S with Barcode Scanner - 3500. The new generation of the successful handy pressure moulding machine now equipped with Scan technology and 4 bar working pressure. On our website www.scheu-dental.com you will find videos on various applications described in this manual. D SCHEU-ACADEMY. Machine type Construction year Dimensions of material mm / inch mm / inch Thickness of material mm / inch Working pressure bar / psi BIOSTAR® 1967–1978 125 / 5” 125 X 125 / 5” X 5” 0.1–3.0 /.0040.12” 5.0 / 72. ASSEMBLING THE MINISTAR TO PLAY WHILE SITTING (picture 2) Insert the U-shaped extension rod into the rear most hole in the upper side of the MINISTAR. Insert the cushioned leg rest rod into the hole located on the lower side of the MINISTAR and push it through so that the threads are exposed on the upper side, next to the U-shaped extension rod. Related Manuals for SCHEU IMPRIMO Cure. Medical Equipment SCHEU MINISTAR S Operation Manual. Vacuum former (6 pages).
ProductFilterRemove filter
The compact pressure moulding unit MINISTAR S® equipped with scanning technology: scanner reads the coded material, allowing programming of all important parameters such as heating time, temperature and cooling time. In other words: precise pressure moulding results are reached in record time thanks to the extremely fast, patented heater and working pressure of 4.0 bar, adjustable via pressure regulator. New generation equipped with user-friendly membrane keypad and large display. All operating parameters are monitored and indicated on the display.
- Technical data
- Power: 230/115/100 V, 750 W
- Working pressure: 0.5 - 4.0 bar
- Dimensions (W × H × D): 500 × 210 × 400 mm
- Weight: 9 kgs
- 3 years warranty, 10 years availability of spare parts
FURTHER INFORMATION
FAQ
No, you can only process material with a diameter of 125 mm in SCHEU-DENTAL pressure moulding machines. Make sure to use the correct material size to avoid any problems during pressure build-up. The rim of a too small blank gets pulled out from the clamping of balancing and locking ring. Thus, a precise and correct thermoforming result is not ensured.
Maybe there is a pellet on the edge of the model cup between material and clamping ring. Interrupt the thermoforming process, taking care the model cup rim is absolutely clean before closing the pressure chamber.
Leaking of air usually does not affect the thermoforming result, because the compressor is constantly supplying air. Nevertheless, you should check the following:
When working on the model platform,
- ensure the model is placed flush with the surface of the model platform. If it's not, trim the model flat or embed it into the pellets.
- sharp edges may have damaged or torn the material. If this is the case, remove the sharp edges on the model.
- the material may have moved when being clamped. In this case, clamp a new blank and restart the thermoforming process.
- the balancing ring may have got stuck. In this case, remove the balancing ring, clean, grease and reinsert it. Ensure it is freely movable!
When embedding the model into the pellets, sharp model edges may cause perforation mainly of thin material.
No, this is not possible. However, depending on the series of your pressure moulding device, you can set an individual heating time using the “clock” symbol on the keyboard of your device or by using the “+” and “-” buttons. Please refer to the manual of your device to find out which option applies to your device. The operation manual of the current series of our pressure moulding machines can be found on this site under 'Further Information' for download. Operation manuals of previous device series are available under SERVICE on top of this web site.
Download Operation & user’s manual of MyPurMist handheld steam inhaler Medical Equipment for Free or View it Online on All-Guides.com.
Brand: MyPurMist
Category: Medical Equipment
Type: Operation & user’s manual for MyPurMist handheld steam inhaler
Pages: 2
MyPurMist
®
Natural
MyPurMist comes with a limited warranty against defective material or
workmanship for a period of one year from the date of purchase. Any
defective part will be repaired or replaced at no charge if the device has
not been tampered with and has been used according to this user
manual. It is especially important that you only use distilled water with
your device. Retain your receipt to prove warranty. This warranty gives
you specific legal rights, as well as other rights that may vary from
Please register your device on mypurmist.com.
Cleaning and storage
1. Empty the reservoir if you plan to store the device for more than 2 days.
2. If MyPurMist has been in storage for an extended period of time, fill the water reservoir with distilled
water and let the device run for 5 minutes to prevent any odor.
3. MyPurMist’s patented technology will not transmit germs in the mist that you breathe. However,
periodically you may clean the outside of the device with a damp cloth. Make sure the device is
4. Do not put in dishwasher or immerse in water. Do not use abrasives to clean.
5. You may periodically remove the mask from the device and clean with soapy water.
6. Make sure to store both the device and water at room temperature.
When troubleshooting your device, please make sure that you have water at room temperature in the
device and that there is a green light on the power supply.
- A red light typically means the device is out of water. In some cases, the red light may come on even
though there is water in the device. A simple resolution is to reset by unplugging the power cord,
- A red blinking light means you’ll have to wait 30 seconds to restart the device.
- One to four blue lights indicate the unit is creating steam at the set temperature.
- Blue blinking lights may mean the device is no longer working. Contact us.
If MyPurMist is not functioning properly consult the troubleshooting guide available on
www.mypurmist.com or contact us. We are here to help!
For warranty claims do not return it to the store or online merchant.
Web: www.MyPurMist.com
1-866-925-6710 (warranty & tech support)
Do not attempt to fix the device yourself. Contact us if it needs repair or replacement.
Warranty
When using electrical appliances, basic safety precautions should always be followed, including the
- Use MyPurMist (device) only for its intended use as described in this manual.
- To protect against a risk of electric shock, do not use device if it is wet or immersed in water or other
liquid. Do not use or store device where it may fall in water.
- The device should always be turned “OFF” and be silent (i.e. let the automatic drying cycle stop the fan)
- Do not operate device with a damaged cord or if the device has been damaged.
Scheu Ministar Service Manual
- Keep device and cord away from heated surfaces. Position cord to avoid pulling or tripping. Do not wrap
- Always unplug the device when filling or emptying the reservoir or when not in use.
- Use MyPurFill water or distilled water in the device. Do not operate the device without distilled water.
Do not overfill. Using any additives in the water reservoir, any other liquid or water with
minerals (e.g. bottled, puried or boiled water) will damage the device and will void the warranty.
- Do not use device without the water reservoir cap in place.
Scheu Ministar Manual Model
- The device is not recommended for children under the age of 13.
- Do not use device near anything flammable.
- During use do not block the air vents on the sides or bottom of the device such as wrapping the product
- Never insert any object or body part into any opening.
- Plug: This device will fit into a polarized outlet either way. If it does not fit your outlet, contact a qualified
electrician. Do not attempt to modify the plug in any way.
- Extension Cords: If an extension cord is necessary, use an approved extension cord. Care should be taken
to arrange the cord so that it cannot be pulled or tripped over.
Do not attempt to fix the device yourself. Contact us if it needs repair or replacement.
optional small mask
The advanced patented Capillary Force Vaporizer (CFV) technology in your MyPurMist inhaler was
previously only available in hospitals. The CFV offers great advantages over any comparative product:
Fine mist that penetrate deep into your nose, sinuses and throat for
Instant ON/OFF, so you don’t have to wait
Small lightweight handheld device
100% humidity where you need it!
●
●
●
Ministar Dental
OS1
Scheu Biostar
Related Products for MyPurMist handheld steam inhaler
Scheu Ministar Instructions
Related Manuals for MyPurMist handheld steam inhaler
MyPurMist handheld steam inhaler: Frequently viewed Manuals